How To Update Samsung Galaxy Beam I8520 to DXJH2 2.1 Asian Firmware

Video link

The users of Samsung Galaxy Beam I8520 phones have now got another firmware update for their phones. Previously, we have seen an update of DXJH1 2.1 firmware update for the Samsung Galaxy Beam I8520 phones. Now the latest firmware update name is DXJH2 2.1 version. This firmware update is again for the Asian users of the Galaxy Beam phones. So, we request other users should not to try this update on their phones. As soon as we get the update for the other users too we will provide you the updation procedure, so as of now the Asian users can apply this firmware update on their phones irrespective of the current OS.

Please note that, DXJH2 firmware update is not an official release through KIES, so we use Odin flash tool to apply this firmware on the Samsung Galaxy Beam I8520 phones. The importance and usage of the Odin flash tool will understand to you in the further pages. For the convenience of the users, we have divided this article into few pages so that every user can easily understand the instructions and the actual firmware update procedure easily.

The most important point is that this firmware update of DXJH2 is strictly applicable for the Asian users of Samsung Galaxy Beam I8520 phones, so we don’t encourage other users to try this update on their phones, as there is a high probability of bricking up of their phones. In the further pages you will find the instructions and the actual procedure on how to update your Samsung Galaxy Beam I8520 phones to DXJH2 2.1 version.

ADDITIONAL INFORMATION:

Stock ROM: Stock ROM is the built-in OS version of your phone that comes at the time of purchase.

Custom ROM: Custom ROM is a stand-alone version of the OS and developers will customize the OS in different ways, as Android OS is an Open sourced platform.

In the next page you will find the instructions to follow before starting the updation process of DXJH2 2.1 firmware for Samsung Galaxy Beam I8520 phones. So, before proceeding to the actual procedure please go through the instructions carefully.

NOTE: WE will take no responsibility in case of any damage to your device, so before proceeding further, we request you to follow the instructions and the procedure carefully in order to avoid any such situations. If you find any difficulties in the process of updation ask them under the comments section and we guarantee the help as we always try to provide you the best solutions.

Instructions for updating your phones to DXJH1 2.1 Asian Firmware:

• The first instruction to follow is backing up of your data on the phone. As soon as the updation process is completed all the data which is stored in the phone will erases. The data may include your messages, contacts, or pictures. So, to avoid such data loss you should backup your data initially. Today, we have various techniques to backup and restore your data safely. For the safety of the users, we are providing some techniques in the box below to secure your data so go through it and backup your data on the phone.

To backup and restore messages & contacts use this link and it redirects you to the procedure of data backup and restore.

Backup and restore all your music files, pictures, and videos on External SD Card.

• The next instruction to follow is making a note of APN & MMS settings. Most of the users are ignoring this step and as a result they are unable to access the internet and MMS services after the firmware update. To access the internet and MMS services after the updation process you need to have a note of these settings. It is the user’s responsibility to make a note of these APN & MMS settings. So, make a note of these settings by following below path.

 “Applications > Settings > Wireless and Network > Mobile Networks > Access Point Names”

• Next instruction to consider here is the battery life of your phone. Any firmware update process eats away the phone’s battery charge than the normal usage, so you need to have a better battery life to end up the updation process smoothly otherwise the process will interrupts in the middle. So, it is advisable to have a battery charge more than 90% so that the process continues without any interruption.
• Remember that the users should have a computer or Laptop in order to apply this firmware update. And also make sure that the OS on your system should be of Windows 7/XP/Vista. The PC (or laptop) should have minimum of USB 2.0 support and ensure that you have ADMIN privileges.

Once you done with all the above-mentioned instructions, you can now proceed further to apply the DXJH2 firmware update on your Samsung Galaxy Beam I8520 phones. Note that, the Asian users of Samsung Galaxy Beam I8520 phones only should apply this DXJH2 firmware on their phones. In the next page, we will see the actual procedure of DXJH1 2.1 firmware update. Proceed further only if you had followed all the instructions or else there is a high chance of bricking up of your phone.

Steps to update your Samsung Galaxy Beam I8520 to DXJH1 Asian Firmware 2.1 version:

• Initially, download Galaxy Beam I8520 DXJH2 package and save it on your computer (or Laptop) desktop. If any interruption occurs in the middle then download the zip file again. Once the file has downloaded, extract the files at the same location. In the extraction procedure you need to enter the password. So enter ‘androidadvices.com’ as a password and click ‘Ok’ to extract the files safely.

 

• The extracted files should contain all the files as shown in the screenshot below. And if you found any of the file missing from the below list then download the zip file again. The Odin file should be must in the extracted files so check it once. So, once you have all the files then continue to next step.

 

• Now open the Odin flash tool from the extracted files list and run it on your computer. We use Odin flash tool now to apply the DXJH1 firmware update. So, turn OFF your phone now and keep Odin tool ready for the usage.

 

• Now, turn ON your phone again and enter into the downloading mode. To enter into the downloading mode, just press volume DOWN key and OK button along with the Power button simultaneously. Refer to below video to know how to turn ON your phone in the downloading mode.

• Now your phone will be in downloading mode, so connect your phone to the PC (or Laptop) using the USB cable. Once the connection is established successfully, the ID:COM block will turn into yellow indicating that all the necessary drivers have been installed in the computer. If the ID:COM block doesn’t turned yellow check the USB cable connection and make sure the connection is safe. Ensure that all the antivirus softwares and firewalls are in OFF stage and if anything is in activation stage then just turn it OFF. Close the KIES until the process of firmware update is completed.

 

• In the Odin tool, you will find various options so click the option ‘PDA’ and select the tar file as given below.

PDA — I8520STHJH2.tar

 

• After selecting the tar file as given in the above image, click on the ‘Start’ button in Odin tool to initiate the updating process. This firmware updation process will take few minutes, so don’t interrupt the process in the middle. And if the process is disturbed by any case like power interruption and any failure, then don’t panic and start the process all over again from the beginning.
• Once the firmware updation process is completed then the phone restarts automatically indicating that the process of firmware updation has completed successfully. So, now turn OFF your mobile and ON it back again to enter into the recovery mode. To enter into the recovery mode, press volume UP key and OK button along with the Power button simultaneously. Refer to below video to know how to turn ON your phone in the recovery mode.

 

• In recovery mode of your phone, you will see various options so choose the options like wipe data/factory reset and Wipe Cache partition. The touch interface will not work in the recovery mode so use volume UP and DOWN keys to scroll up and down. In the process of firmware update, some of the cache files will generates in your phone in order to damage some applications of your phone. So, to avoid any such damage on your phone we need to clean up all the cache files from the phone. To clean all those cache files use the options as given above and also refer to the above video tutorial to get better idea on cleaning of cache files. After clearing all the cache files form the phone, reboot it now using the option ‘reboot system now’, and enter the language preferences and the Google account preferences again so that you can bring back your phone into the normal mode.

That’s all; the Samsung Galaxy Beam I8520 phones now updated with the latest firmware of DXJH2 2.1 version. Note that, this will work only for the Asian users of Samsung Galaxy Beam I8520 phones

Incoming search terms:

• galaxy_beam_i8520_dxjh2 zip
• I8520STHJH2 tar
• samsung i8520 flashing guide